Therapy mode that works on universal frequency 77 Hz, allows to find pathological points moving the device over the skin. When you'll pass device over pathological points, you feel sticking, painfulness, or reveal changing of the skin color.
That means you diagnosed deviation spots, therefore stay there for a few minutes to cure this pathological areas and you can get pain relief in 5-20 minutes.

Test mode that works on 10 Hz, also helps to find pathological spots measuring time of reply (when LED lights up). Finding smaller time of reply you get these deviation points and now you are ready to treat them.

Accesories available for your DENAS device:
Massage Electrodes, DENS-glasses, DENS-applicator (Pads/Belt), Point probe
The DENAS Adapter is needed to hook up these electrodes.

The DENS method is effective for treatment of acute respiratory diseases, headache, toothache, menstrual pain, muscle and joint pain, as well as osteochondrosis pain.

The device alleviates inflammation edema and promotes healing of wounds, fractures and burns.

The new DENAS device operates in two therapeutic modes: ‘Therapy 1’ at 77 Hz, and ‘Therapy 2’ at 140 Hz; as well as the ‘Test’ mode.

The ‘Test’ mode should be used in cases of expected physical or brainwork, physical and mental strain, and for prevention of colds during epidemics.
Test mode works on 10 Hz, and helps to find pathological spots by measuring the time of response (when LED lights up).

‘Therapy 1’ The therapeutic frequency of 77 Hz is designed to be applied to the direct complaint area (such as functional disorders, pain syndromes of internal diseases, and postoperative problems) and to the segmental areas as explained in the manual.
A relieving effect appears in 15-30 minutes and lasts for well over an hour.

‘Therapy 2’The therapeutic frequency of 140 Hz is applied to the direct complaint area, especially for full-blown pain associated with the locomotive system diseases and affections and problems with the peripheral nervous system.
An effect appears in the first minutes of treatment and lasts from several minutes to an hour.
To enhance a curative effect, treatment may be continued at the lower (77 Hz) frequency.

Accesories available for your new DENAS device:
Massage Electrodes, DENS-glasses, DENS-applicator (Pads/Belt), Point probe

The new DiaDENS-T renders an effect in three modes:
* * * Curative – ‘Therapy’ (Th) mode has five exposure frequencies (20Hz, 60Hz, 77Hz, 140Hz & 200Hz);
* * * Preventive – MED (M): and
* * * Screening (S).

You can apply the 140Hz and 200Hz therapeutic frequencies to the direct complaint to obtain quick relief, achieved in the first minutes of treatment and lasting from several minutes to an hour.
This is usually used for full-blown pain associated with the locomotive system diseases and the peripheral nervous system. To enhance a curative effect, usage of the device may be continued at the lower frequencies.

For functional disturbances and pain syndromes of internal diseases and during a postoperative period a therapeutic frequency of 60Hz or 77 Hz can be applied to the direct complaint and segmental areas.
An effect appears in 15-30 minutes and lasts for 1-1.5 hours and even longer.

Using the therapeutic frequency of 20Hz for these has a slower but longer lasting result. A maximum curative effect develops in 20-60 minutes and lasts for several hours.

The Screening mode allows the choice of optimal areas of exposure for improvement of systemic DENS effect and detection of hidden problem zones through analysis of an increase in rate of electrical impedance of the skin in areas around the selected area.

The MED mode (Minimal Effective Dose) should be used in cases of expected physical or brainwork, physical and mental strain, and for prevention of colds during epidemics.

Accesories available for your new DiaDENS T Healing device:
Massage Electrodes, DENS-glasses, DENS-applicator (Pads/Belt), Point probe

The DiaDENS PCM has special function "Schedule of each-day sessions", that reminds you about treatment every day.

As usual the DiaDENS-PCM has 3 modes for zonal diagnostic, treatment and prophylaxis - Therapy Mode, MED Mode, and Screening Mode.

Therapy mode works on different frequencies (10, 20, 60, 77, 140, 200 Hz, "77 10", "77 AM" and ultra low frequencies); it allows to find deviation spots by moving the device over the skin.

If, when you pass DiaDENS-PCM over these spots (keeping contact with the skin of course), you feel sticking, painfulness, or see changes of the skin colour, it means you found a deviation spot, therefore stay there for a few minutes to cure these pathological areas - and you can get pain relief in 5-20 minutes.

MED mode works on 10 Hz to help you to find pathological spots by measuring the time of response. Use the first phase of MED program; you can also use both phases of the MED program in order to do prophylaxis.

Screening Mode is a pure diagnostic mode. It allows you to find pathological areas very quickly by getting digital indexes from the device.

Accesories available for your DiaDENS PCM Healing device:
Massage Electrodes, DENS-glasses, DENS-applicator (Pads/Belt), Point probe